珠三角储罐 STORAGE TANK

介绍：

我公司生产的不锈钢储存罐为无菌储罐装置广泛应用于乳品工程、食品工程、啤酒工程、精细化工工程、生物制药工程和水处理工程等诸多领域。为新设计的一种储存设备，具有操作方便、耐腐蚀、生产能力强、清洗方便、防震等优点，是在生产中储存，运输的关键设备之一。采用全不锈钢材料制作，接触物料材质可选用316L或304，冲压成型封头无死角焊接，内外抛光，完全符合GMP标准。储罐有移动式、固定式、真空型、常压型等各种不同类型供选择，其中移动式的容量从50L-1000L，固定式的容量从0.5T-300T，按要求制作。

特点:

1、筒体材质：不锈钢304或316L；

2、设计压力：0.35Mpa；

3、工作压力：0.25MPa3；

4、筒体规格：见技术参数；

5、内外表面镜面抛光，Ra<0.4um；

6、其他要求：按设计图纸生产。

原理：

1.储存罐分为，立式储存罐和卧式储存罐，单层储罐、双层储罐和三层保温储罐。

2.不锈钢储存罐设备设计合理、工艺先进、自动控制，符合GMP标准要求，罐体采用立式或卧式单层或双层结构，可根据用户要求充填保温材料。

3.根据储存能力不同由50-15000L，储存能力在20000L以上的储罐，建议使用室外储存罐.材质使用SUS304进口不锈钢制成。

4.储存罐具有良好的保温性能，罐体附带装置如下：搅拌机，CIP清洗喷淋头，人孔，温度孔，液位指示器，防菌呼吸气孔，无菌采样口，进、出料口等。

Introduction:

Stainless steel storage tanks produced by our company are widely used in dairy engineering, food engineering, beer engineering, fine chemical engineering, biomedical engineering and water treatment engineering. The newly designed storage equipment has the advantages of convenient operation, corrosion resistance, strong production capacity, convenient cleaning, and shockproof. It is one of the key equipment for storage and transportation in production. Made of all stainless steel materials, the material of contact material can be selected 316L or 304, stamping forming head without dead angle welding, internal and external polishing, fully in line with GMP standards. The storage tank has a variety of different types such as mobile, fixed, vacuum, and atmospheric pressure types, of which the mobile capacity is from 50L-1000L and the fixed capacity is from 0.5 T-300T, which is produced as required.

Features:

1, cylindrical material: stainless steel 304 or 316L;

2, design pressure: 0.35 Mpa;

3, work pressure: 0.25 MPa3;

4, cylindrical specifications: see technical parameters;

5, inner and outer surface mirror polishing, Bar & lt; 0.4 um;

6, other requirements: according to the design drawings production.

Principle:

1. Storage tanks are divided into vertical storage tanks and horizontal storage tanks, single-layer storage tanks, double-layer storage tanks, and three-layer thermal storage tanks.

2. Stainless steel storage tank equipment is reasonable in design, advanced in technology, and automatic control. It meets the requirements of GMP standards. The tank adopts a vertical or horizontal single-layer or double-layer structure and can be filled with insulation materials according to user requirements.

3. According to the storage capacity of 50-15000L, storage capacity of more than 20000L, it is recommended to use outdoor storage tanks. The material is made of stainless steel imported from SUS304.

4. The storage tank has good thermal insulation performance. The tank is equipped with the following devices: blender, CIP cleaning spray head, human hole, temperature hole, liquid level indicator, anti-bacteria breathing hole, aseptic sampling port, incoming and outgoing feed port, etc..